User`s guide

20 User’s Guide U3025-90001
U3025AE10 Controlling the System with E8363/4C and N5230C
Select the Port Control down arrow for Ports 9 through 12.
Figure 17 External Test Set U302xAE10 (Port 9 - 12)
Trace Measure S-Parameter
S-Parameter selection can be accomplished using Response > Measure. Use the
drop-down menus to select 1 of 144 S-Parameters for the 12-Port system. The first number
in the Sxx selection is the Receiver Port and the second number will be the Source Port.
Any port can be selected to be the Receiver, Source or both, as in S11. The front panel R
LED indicates the port is the Receiver and the S LED indicates the port is the Source.
Figure 18 12-Port Trace Measure