User guide

N4970A Operation Overview
14
PRBS Generator 10 Gb/s User Guide
2.4 Front Panel Quick Reference
Figure 2. N4970A front panel
RESET:
A momentary reset switch provides a means to restart the bit stream from an
all zero condition.
Output: The PRBS signal is available as a differential signal on the SMA female
output terminals. Terminate unused outputs.
Impedance: 50 Ω
Max DC: ± 5 V
Nominal DC: 0 V
AC Level: > 300 mV p-p typical, single-ended
> 750 mV p-p typical, single-ended (Option 010)
ESD sensitive; terminate if unused. DC Blocked.