User guide
Table Of Contents
- 1 Getting Started
- 2 N4962A System Overview
- 3 System Details and Performance Specifications
- 4 Operation
- 5 Remote GPIB Interface
- 6 Returning the N4962A Serial BERT to Agilent Technologies
Operation
54
Serial BERT 12.5 Gb/s User Guide
• Press the Display > Scroll ↓ button and select Ø
• Press the Adjust > Config State + button to auto-select the detector
phase
• Observe the Error ε light (should remain off, indicating no errors
detected)
• Press the Receiver > On button and ensure the light is on
• Press the Display > Scroll ↑ button and select ε time (sec) (should be
increasing)
• Press the Display > Scroll ↑ button and select BER
• Press the Receiver > On button and ensure the light is off when
complete