Specifications

Making Your First Measurements
Running a WLAN Confidence Check
Chapter 2 31
Step 3. Rename the Test Set in Connection Wizard.
1. In the Agilent Connection Expert, Click on Refresh All as shown in Figure 2-13.
2. From the Instrument I/O on this PC panel, select your Test Set listing with a
right click. If you do not see your Test Set expand the appropriate connection
type by clicking on the + symbol.
Figure 2-13 Typical Connection Expert Screen
3. Click on Add Visa Alias.
4. Enter your new Visa Alias Name, remember this as it is used in step 4. For
example “MyNewInstrument”. Do not use spaces.
5. Click on OK.
Step 4. Running the Virtual Front Panel Program.
1. Run the Virtual Front Panel program, from the windows task bar, Start>All
Programs>Agilent N4010A WLAN Test suite> Virtual Front Panel.
2. Locate the Instrument field, situated on the Instrument Control tab of the
Virtual Front Panel. Enter the Visa Alias Name of the Test Set (the same name
that was created earlier; see Step 3.4).
3. Click on Create.
In a few seconds the Test Set’s display changes to yellow.
1
2
3
N4010-90086.book Page 31 Friday, April 4, 2014 3:12 PM