Specifications

Regulatory Information
Compliance and Markings
Chapter 344
Compliance and Markings
Electromagnetic Compatibility (EMC)
This product conforms with the protection requirements of European
Council Directive 89/336/EEC for Electromagnetic Compatibility (EMC).
The conformity assessment requirements have been met using the
technical Construction file route to compliance, using EMC test
specifications EN 55011:1991 (Group 1, Class A) and EN 50082- 1:1992.
In order to preserve the EMC performance of the product, any cable
which becomes worn or damaged must be replaced with the same type
and specification.
Refer to the “Declaration of Conformity” on page 48.
10 Base- T LAN Connection Radiated Emissions:
To ensure compliance with EN 55011 (1991) a screened category 5,
STP patch lead (RJ45 cable) should be used to connect the LAN port.
Safety
This Test Set has been designed and tested in accordance with
publication EN61010- 1(2001) / IEC 1010- 1(2001) / CSA C22.2 No.
61010- 1- 04 Safety Requirements for Electrical Equipment for
Measurement, Control and Laboratory Use, and has been supplied in a
safe condition. The instruction documentation contains information
and warnings which must be followed by the user to ensure safe
operation and to maintain the Test Set in a safe condition.