Specifications

Regulatory Information
General Specifications
Chapter 3 43
Cleaning
Use a soft, clean, damp cloth to clean the front- panel and side covers.
Usage
This Test Set is designed for indoor use only.
WARNING Appliance coupler (mains input power cord) is the power disconnect
device. Do not position the Test Set such that access to the coupler
is impaired.
WARNING For continued protection against fire hazard, replace the line fuse
only with the same type and line rating (250V, F3.15A, 20mm fast
blow fuse with high breaking capacity, Agilent Part Number
2110- 0957).
The use of other fuses or materials is prohibited. Always disconnect
the Test Set from the mains supply before attempting to replace the
fuse.
WARNING No operator serviceable parts inside. Refer servicing to qualified
personnel. To prevent electrical shock do not remove covers.
WARNING If this Test Set is not used as specified, the protection provided by
the equipment could be impaired. This Test Set must be used in a
normal condition only (in which all means for protection are
intact).
CAUTION This Test Set is designed for use in Installation Category II and
Pollution Degree 2 per IEC61010 and 60664 respectively.