Specifications

Making Your First Measurements
Connecting USB, GPIB or LAN
Chapter 2 37
6. In the pop up screen, shown in Figure 2-18, select the IP Address
link.
7. Enter the IP address which is displayed on the Test Set.
8. Click on Test Connection.
9. Click on Identify Instrument.
Figure 2- 18 LAN Instruments Selection Screen
10. Confirm the returned serial number matches the Test Set.
11. Click on OK.
To complete the confidence check for
• Bluetooth GMA, refer to Step 3 “Using the GMA” on page 26.
• WLAN, refer to Step 3 “Running the Test Harness Program.” on
page 22.
• SCPI, refer to Step 3 “Sending SCPI commands” on page 19.
6
7
8
9
11