Specifications

Making Your First Measurements
Connecting USB, GPIB or LAN
Chapter 232
Connecting by GPIB
Changing the GPIB Address
The GPIB address is an integer between 0 and 30. The Test Set is
shipped with a default address set to 15. The GPIB address is stored
in non- volatile memory.
To change the GPIB address manually.
Press
System, .
Use the Numeric keys on front panel to enter the required GPIB
address in the field. Press the
softkey.
Connecting to your Computer
1. Follow your GPIB interface card vendor’s instructions for installing
and configuring GPIB hardware on your computer.
2. Connect a GPIB cable between your computer and the Test Set.
3. Run the Connection Expert program. It can be opened by double
clicking the icon in the task bar notification area or from the
windows task bar, Start>All Programs>Agilent IO Libraries
Suite>Agilent Connection Expert.
In the Connection Expert program, click on Refresh All.
Comms
Enter