Specifications

Making Your First Measurements

Connecting USB, GPIB or LAN

Chapter 230

Connecting USB, GPIB or LAN

The Test Set can be remotely controlled by USB, GPIB (IEEE488) or

LAN programming interfaces. Only one interface can be used at a time.

• To Connect by USB refer to “Connecting by USB” on page 31.

• To Connect by GPIB refer to “Connecting by GPIB” on page 32.

• To Connect by LAN refer to “Connecting by LAN” on page 34.

For more detailed information on configurating the remote interface

connectivity, refer to the Agilent Technologies USB, LAN or GPIB

Interfaces Connectivity Guide. You can access the Connectivity Guide

via the Agilent IO Libraries Control icon. Alternatively, you can access

the Connectivity Guide via the internet at