Specifications

iii
Legal Information
Certification
Agilent Technologies certifies that this product met its published
specifications at the time of shipment from the factory. Agilent
Technologies further certifies that its calibration measurements are
traceable to the United States National Institute of Standards and
Technology, to the extent allowed by the Institute’s calibration facility,
and to the calibration facilities of other International Standards
Organization members.
Safety Symbols
The following symbols on the Test Set and in the documentation
indicate precautions which must be taken to maintain safe operation
of the Test Set.
This is the ‘Caution - Refer to Instruction
Documentation’ Symbol. The product is
marked with this symbol when it is necessary
for the user to refer to the instructions in the
supplied documentation.
Alternating current (AC)
This symbol indicates the position of the
operating switch for ‘Stand- by’ mode. Note,
the Test Set is NOT isolated from the mains
when the switch is in this position. To isolate
the Test Set, the mains coupler (mains input
cord) should be removed from the power
supply.