Specifications

Making Your First Measurements
Running a SCPI Confidence Check
Chapter 2 19
Step 3. Sending SCPI commands
1. In the Agilent Connection Expert program, click on Refresh All.
2. Select the Test Set from the Instrument I/O on this PC panel as
shown in Figure 2-6. If you do not see your Test Set then expand
the appropriate connection type by clicking on the + symbol.
Figure 2- 6 Connection Expert Screen
3. Right Click on the Test Set listing.
4. Select Send Commands to this Instrument.
5. Click on Send & Read.
6. The program displays the manufacturer, model number and serial
information. Check this information matches the Test Set.
Congratulations the SCPI confidence check is complete.
1
3
4
2