Specifications

Making Your First Measurements
Running a Confidence Check on the Front Panel (Bluetooth)
Chapter 216
Figure 2- 3 Typical Configure Link Screen when ACL is Selected
4. Use the
Arrow and Select keys to highlight and select an ACL Link
as shown in Figure 2-3.
5. Press the softkey.
6. Press the softkey.
7. In a few seconds the Inquiry Results are displayed. An example is
shown in Figure 2-4. If no device is detected, check the EUT
connection, and press the softkey.
NOTE To apply Loss Compensation, for example for cable loss:
Press
Mode, . Use the Select key to check the Apply Loss
Compensation box. Use the arrow keys and numeric pad to enter
values in the Fixed Loss field. Press the softkey.
Figure 2- 4 Typical Inquiry Results Screen
8. Ensure your device is highlighted in yellow, use the arrow keys if
4
5
EUT
Inquiry Procedure
Restart Inquiry
Loss Comp
dB
7
9