Agilent IniniiVision Oscilloscope Probes and Accessories For 2000 X-, 3000 X-, 4000 X-, 6000 X-, 5000, 6000, and 7000 Series Selection Guide Data Sheet To achieve the best results from your scope, you need the right probes and accessories for your particular application. That’s why Agilent Technologies offers a complete family of innovative probes and accessories for InfiniiVision oscilloscopes. For the most up-to-date and complete information about Agilent’s accessories, please visit our Web site at: www.
Probe Compatibility Table For ordering information when replacing your probe or probe accessory: Refer directly to the page number listed in the table of contents for your probe model. To assist you in selecting the proper probe for your application: Use our probe compatibility table below to find the probes that are recommended for use with your 2000 X-, 3000 X-, 4000 X-, 6000 X-, 5000, 6000, and 7000 Series InfiniiVision oscilloscope.
DSO5000A 100 MHz MSO/ DSO5000A DSO6000A4 300 - 500 MHz 100 MHz MSO/DSO6000A4 300 MHz - 1 GHz MSO/DSO7000A/B 100 MHz - 1 GHz Probe type Probe model Passive probes page 4 N2863B 10:1 300 MHz (included in 5000 Series 100/300 MHz) Recommended Rcommended Rcommended Compatible 10070D 1:1 20 MHz Recommended Recommended Recommended Recommended 10073D 10:1 500 MHz (included in 6000/7000 Series 300 MHz to 1 GHz and 5000 Series 500 MHz) Compatible Recommended Compatible Recommended 10074D 10:1 150
Passive Probes • Designed for optimal performance with your Agilent InfiniiVision Series oscilloscopes • 1:1 and 10:1 attenuation • 20 to 500 MHz Accessories available for 10070D/73D/74D passive probes N4848A Probe-tip-to-BNC (m) adapter, qty 2 Accessories available for N2873A/ N2894A (and other N287xA Series passive probes) N4829A Probe tip kit (rigid and spring loaded), 10 each N4831A Sprung hook adapter 2.
Passive Probes (continued) Ordering information for Agilent passive probes 10070D 1:1 20 MHz passive probe N2862B 10:1 150 MHz passive probe 10074D 10:1 150 MHz passive probe N2863B 10:1 300 MHz passive probe N2889A 10:1/1:1 350 MHz passive probe 10073D 10:1 500 MHz passive probe N2890A 10:1 500 MHz passive probe N2873A 10:1 500 MHz miniature passive probe N2894A 10:1 700 MHz miniature passive probe 10073D/74D passive probe N2873A/N2894A passive probe with standard accessories N2889A 10:1
High-voltage Passive Probes • Ideal for measuring up to 30 kV • Up to 250 MHz bandwidth • 100:1 or 1000:1 attenuation 10076B high-voltage probe The Agilent 10076B 4 kV 100:1 passive probe gives you the voltage and bandwidth you need for making high-voltage measurements. Its compact design makes it easier to probe today’s small power electronics components and its rugged construction means it can withstand rough handling without breaking.
IniniiMax Active Probes and Accessories 1130A-34A IniniiMax high-performance active probe system • 1.5 - 7 GHz InfiniiMax probe system Operating characteristics • InfiniiMax probe amplifier supports both differential- and single-ended measurements for a more costeffective solution Probe bandwidth (–3 dB) 1134A: > 7 GHz 1132A: > 5 GHz 1131A: > 3.5 GHz 1130A: > 1.5 GHz Rise and fall time (10 to 90%) 1134A: 60 psec 1132A: 86 psec 1131A: 100 psec 1130A: 233 psec Input capacitance Cm = 0.
IniniiMax Active Probes and Accessories (continued) 1130A-34A IniniiMax high-performance active probe system Ordering information for Agilent IniniiMax 1130A probe and accessories Probe amplifier 1130A 1.
IniniiMode Active Probes and Accessories N2750A-52A IniniiMode probe • 1.
IniniiMode Active Probes and Accessories (continued) Characteristics and specifications for N2750A Series InfiniiMode probes Model number N2750A N2751A N2752A Probe bandwidth* (–3 dB) 1.5 GHz 3.5 GHz 6 GHz Rise time, probe only (10-90%) 233 psec 100 psec 58.
High-voltage Differential Active Probes • 25 to 800 MHz bandwidth Characteristics for N2790A, N2791A and N2891A differential probe • Switchable attenuation N2790A N2791A N2891A Bandwidth 100 MHz 25 MHz 70 MHz Risetime 3.
High-voltage Differential Active Probes (continued) N2792A/N2818A 200-MHz and N2793A/N2819A 800-MHz general-purpose differential probe The N2792A/N2818A 200-MHz and N2793A/N2819A 800-MHz differential probes provide the superior generalpurpose differential signal measurements required for today’s high-speed power measurements, vehicle bus measurements, and digital system designs.
Single-ended Active Probes N2795A/96A/97A low-cost single-ended active voltage The N2795A/96A/97A are equipped with a white LED headlight to illuminate the circuit under test. The probes are powered directly by the InfiniiVision and Infiniium Autoprobe interface, eliminating the need for an additional power supply. The probes also come with a number of accessories that allow for easy connections to the circuit under test.
Mixed Signal Oscilloscope Logic Probes • Compatible with all 40-pin logic probe • Flying leads offer flexibility and convenience MSO probes offer great value and performance These logic probes for the InfiniiVision mixed signal oscilloscopes (MSOs) are the same ones used with Agilent industry-leading high-performance logic analyzers. This means we can offer the best performance, great value and access to the industry’s broadest range of logic probing accessories.
Mixed Signal Oscilloscope Logic Probes (continued) The InfiniiVision MSO digital channels were architected to be compatible with a wide variety of probing accessories developed over 20 years for logic analyzers. There’s a good chance that the logic analyzer accessories you already own work with your MSO.
Clamp-on Current Probes • Up to 100 MHz bandwidth and 500 Arms current • Hybrid technology to measure ac and dc • Compatible with 1 MΩ scope input Accurate current measurements without breaking the circuit Compatible with any scope or voltage measuring instruments with BNC input, the 1146B and N2780B Series current probes offer accurate and reliable solutions for measuring dc and ac currents.
Clamp-on Current Probes (continued) Characteristics of the 1146B current probe Bandwidth* dc to 100 kHz (–3 dB) Current range* 100 mV/A:100 mA to 10 A peak 10 mV/A:1 to 100 A peak Output signal 1000 mV peak max AC current accuracy* Range Accuracy Range Accuracy Range Accuracy 100 mV/A (50 mA to 10 A peak) 3% of reading ±50 mA 10 mV/A (500 mA to 40 A peak) 4% of reading ±50 mA 10 mV/A (40 A to 100 A peak) 15% max at 100 A 15 A peak, 15 A DC, 10 Arms (when two probes are used with IniniiVision scope) 30
High-Sensitivity Current Probes • Measure AC/DC currents as low as 50 uA • Ideal for capturing and analyzing low level current flow in the DUT to characterize sub-circuits or measure current consumption of battery-powered devices or integrated circuits • Simultaneous high- and low-gain views of the current waveform for more precise wide dynamic range measurement (with N2820A) As modern battery-powered devices and integrated circuits become more green and energy efficient, there is a growing need to ma
High-Sensitivity Current Probes (continued) Probe characteristics and specification Bandwidth (–3 dB) Risetime (Tr = 0.35/bandwidth, 10% - 90%) Minimum measurable current* Maximum measurable current DC amplitude accuracy Gain*** Max input voltage Output impedance Standard accessories Compatible InfiniiVision oscilloscopes Max number of probes supported by 3000 X-Series Max number of probes supported by 4000 X-Series Zoom-out channel: DC to 3 MHz Zoom-in channel: DC to 500 kHz Zoom-out channel: < 0.
Wedge Probe Adapters • Easy connection to surface mount ICs • Safe, with no chance of shorting • Mechanically non-invasive contact • 3-, 8-, and 16-signal versions • Supports 0.5 and 0.65-mm TQFP and PQFP packages The wedge probe adapter connects directly to 1145A/1155A active probes and the dual lead adapter provided with the 1160A-65A passive probe family and N2877A/N2879A accessory kits for use with N287xA Series passive probes.
Miscellaneous Accessories Testmobile Carrying cases Rackmount kit The sturdy Agilent 1180CZ Testmobile for use with 6000 Series oscilloscopes makes sharing your scope easy. Its large wheels make it easy to roll from place to place. For use with the Agilent 6000 Series scope, the 1180CZ Testmobile scope cart with the N2919A bracket provides convenient mobility and secure mounting of your scope.
Miscellaneous Accessories (continued) Probe positioners • Easy-to-manipulate probe arms for hands-free browsing • One- or two-articulated arms with stable high-mass base (N2784A and N2785A) • Quick and stable XY positioning (N2786A) • Stable 3D probe positioning for hard-to-reach XYZ access (N2787A) • Compatible with most scope probes • Applications: Hands-free browsing for electronic components on PC board The N2787A is a 3D probe positioner with a flexible, articulating arm that can be quickly positioned
N2744A T2A Probe Interface Adapter • Enables Tektronix® TekProbeBNC® level 2 probes to connect to Agilent’s AutoProbe interface on InfiniiVision 3000 X-, 4000 X-, 6000 X-, 5000, 6000, and 7000 oscilloscopes • An easy-to-use plug-on adapter to the Agilent oscilloscope’s AutoProbe interface • Provides necessary probe power, calibration, and offset control as needed to the attached TekProbe probe The N2744A T2A interface adapter enables selected TekProbe® interface level 2 probes to be used with Agilent oscill
Recommended Probes for Low-/Mid-Speed Bus Measurements Applications Speed and signal type Recommended probe Required probe bandwidth LIN 10 kHz, single-ended SE passive > 100 MHz ARINC 425 1000 kbps, differential N2792A/N2818A 200 MHz CAN 1 Mbps, differential N2792A/N2818A 200 MHz MIL-STD 1553 1 Mbps, differential ±25 Vpp N2792A/N2818A 200 MHz I²S (audio) ~2.
Agilent Technologies Oscilloscopes Multiple form factors from 20 MHz to > 90 GHz | Industry leading specs | Powerful applications 25
www.agilent.com www.agilent.com/find/probes myAgilent myAgilent www.agilent.com/find/myagilent A personalized view into the information most relevant to you. For more information on Agilent Technologies’ products, applications or services, please contact your local Agilent office. The complete list is available at: www.agilent.com/find/contactus www.axiestandard.
