User`s guide

99
Agilent InfiniiVision 2000 X-Series Oscilloscopes
User's Guide

7
Display Settings
To adjust waveform intensity 99
To set or clear persistence 101
To clear the display 102
To select the grid type 102
To adjust the grid intensity 103
To freeze the display 103
To adjust waveform intensity
You can adjust the intensity of displayed waveforms to account for various
signal characteristics, such as fast time/div settings and low trigger rates.
Increasing the intensity lets you see the maximum amount of noise and
infrequently occurring events.
Reducing the intensity can expose more detail in complex signals as
shown in the following figures.
1 Press the [Intensity] key to illuminate it.
This key is located just below the Entry knob.
2 Turn the Entry knob to adjust the waveform instensity.
Waveform intensity adjustment affects analog channel waveforms only (not
math waveforms, referencewaveforms, digital waveforms, etc.).