User`s guide

78 Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
5 Reference Waveforms
1 Display the desired reference waveform (see "To display a reference
waveform" on page 76).
2 Press the Skew softkey and turn the Entry knob to adjust the reference
waveform skew.
To display reference waveform information
1 Press the [Ref] key to turn on reference waveforms.
2 In the Reference Waveform Menu, press the Options softkey.
3 In the Reference Waveform Options Menu, press the Display Info softkey
to enable or disable reference waveform information on the oscilloscope
display.
4 Press the Tr ansp arent softkey to enable or disable transparent
information backgrounds.
This setting is also used for other oscilloscope information on the
display, like mask test statistics, etc.
To save/recall reference waveform files to/from a USB storage device
Analog channel, math, or reference waveforms can be saved to a reference
waveform file on a USB storage device. See "To save reference waveform
files to a USB storage device" on page 213.
You can recall a reference waveform file from a USB storage device into
one of the reference waveform locations. See "To recall reference waveform
files from a USB storage device" on page 216.