User`s guide

114 Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
9 Triggers
• Analog channel, 1 to the number of channels
• Digital channel (on mixed-signal oscilloscopes), D0 to the number of
digital channels minus one.
• External.
• Line.
• WaveGen (not available when the DC or Noise waveforms are
selected).
You can choose a channel that is turned off (not displayed) as the
source for the edge trigger.
The selected trigger source is indicated in the upper- right corner of the
display next to the slope symbol:
• 1 through 4 = analog channels.
• D0 through Dn = digital channels.
• E = External trigger input.
• L = Line trigger.
• W = Waveform generator.
4 Press the Slope softkey and select rising edge, falling edge, alternating
edges, or either edge. The selected slope is displayed in the upper- right
corner of the display.