User`s guide

105
Agilent InfiniiVision 2000 X-Series Oscilloscopes
User's Guide

8
Labels
To turn the label display on or off 105
To assign a predefined label to a channel 106
To define a new label 107
To load a list of labels from a text file you create 108
To reset the label library to the factory default 109
You can define labels and assign them to each analog input channel, or
you can turn labels off to increase the waveform display area. Labels can
also be applied to digital channels on MSO models.
To turn the label display on or off
1 Press the [Label] key on the front panel.
This turns on labels for the displayed analog and digital channels.
Labels are displayed at the left edge of the displayed traces.
The figure below shows an example of displayed labels.