User's Manual Network Analyzer N2610A

114 Agilent FrameScope 350 User’s Manual
4 Fiber Testing
Running an Autotest
Running an Autotest
To run an autotest:
1 Connect the FrameScope 350 and Dual Remote 350 to the ends of the
circuit needing certification.
2 On the FrameScope Fiber Main Menu, press Fiber Autotest. The
Fiber Autotest Setup screen displays.
3 Press Start Test. The autotest executes.
4 Follow the on screen directions, which may include swapping fiber
connections.
5 To save the test results, see “Saving Test Results” on page 79