User`s guide

Agilent Technologies
P.O. Box 2197
1900 Garden of the Gods Road
Colorado Springs, CO 80901
Safety
Notices
This apparatus has been
designed and tested in
accordance with IEC Publi-
cation 1010, Safety Require-
ments for Measuring
Apparatus, and has been
supplied in a safe condi-
tion. This is a Safety Class I
instrument (provided with
terminal for protective
earthing). Before applying
power, verify that the cor-
rect safety precautions are
taken (see the following
warnings). In addition, note
the external markings on
the instrument that are
described under "Safety
Symbols."
Warnings
• Whenever it is likely that
the ground protection is
impaired, you must make
the instrument inoperative
and secure it against any
unintended operation.
• Service instructions are for
trained service personnel.
To avoid dangerous electric
shock, do not perform any
service unless qualified to do
so. Do not attempt internal
service or adjustment unless
another person, capable of
rendering first aid and
resuscitation, is present.
• Do not install substitute
parts or perform any unau-
thorized modification to the
instrument.
• Capacitors inside the
instrument may retain a
charge even if the instru-
ment is disconnected from
its source of supply.
• Do not operate the instru-
ment in the presence of
flammable gasses or fumes.
Operation of any electrical
instrument in such an envi-
ronment constitutes a defi-
nite safety hazard.
• Do not use the instrument
in a manner not specified by
the manufacturer.
Safety Symbols
Instruction manual sym-
bol: the product is marked
with this symbol when it is
necessary for you to refer to
the instruction manual in
order to protect against
damage to the product or
personal injury.
Hazardous voltage symbol.
Earth terminal symbol:
Used to indicate a circuit
common connected to
grounded chassis.
!