User`s guide

To Test Bandwidth

• The 8720ES VNA will beep when done.

• Connect load end of 85052D to the available end of the port two SMA cable.

• Select the "loads" screen key the "Reverse" group.

• Press "broadband" screen key selection.

• The 8720ES VNA will beep when done.

• Press the "done loads" screen key.

• You have just calibrated the other side of the reference plane.

Press "standards done" key.

11 Connect port two SMA cable to the non-pincher side of PV/DS test board.

E2655-66503

8120-4948

Reference plane