User`s guide

Dynamic Range and Offset Voltage Limitations

Configuration 5: Flex Nose Clips

Bandwidth with N2795A: 500 MHz

Bandwidth with N2796A: 500 MHz

Replacement Kit Part Numbers (the quantities are the amounts shipped in the

replacement kits, not the quantity included with the probe):

Y-Lead Adapter: 5061-7392 (qty. 1)

Flex Nose Clip (red): 5061-7390 (qty. 1)

Flex Nose Clip (black): 5061-7391 (qty. 1)

You can use flex nose clips to make connections to components or wires with leads

that are 1.01 mm (0.04 inches) in diameter or smaller. With today’s miniature IC- and

component-packaging techniques, these clips can make probing challenging devices

much easier. Most users prefer to attach the clips to the probe via the Y-lead adapter

as shown in the picture below. Press the back of the flex nose clip to extend the

grasping hook and then release to tighten the hook around the component you are

testing.