User`s guide

20
Dynamic Range and Offset Voltage Limitations
Configuration 4: Y-Lead Adapter with 0.1”
Headers
Bandwidth with N2795A: 750 MHz
Bandwidth with N2796A: 1 GHz
Replacement Kit Part Numbers (the quantities are the amounts shipped in the
replacement kits, not the quantity included with the probe):
Y-Lead Adapter: 5061-7392 (qty. 1)
The Y-lead adapter offers a convenient and reliable method to connect both the probe
signal and ground to probe points on the board or other probe accessories. For
example, this can used to connect to connector headers or to other accessories like
the Flex Nose Clip Adapter (see the pictures below).
The sockets accept 0.56-0.86 mm round and 0.64 mm square (0.022 - 0.034 inch round
and 0.025 inch square) diameter pins. The maximum insertion depth is 7.5 mm (0.295
inch) and the outer insulation of the socket is < 2.54 mm. You can use it for 2.54 mm
pitch (0.1 inch) terminals.