User`s guide

78 Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide
Using Analog Modulation (Option UNT Only)
Using an External Modulation Source
Figure 4-2 Wideband AM Softkey Menu
Setting the Wideband AM
1. Set up and enable the desired modulation type.
2. Press AM > More > AM WB to On
AM > More
Enables and disables the
wideband AM feature.
Note: If the I/Q is turned
off or the I/Q source is set
to anything other than
external, then the
wideband AM turns off.
For details on each key, use key help
as described on page 42.
When the Wideband AM is enabled, these fields are
active.