User`s guide

Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide 133
Using Pulse Modulation (Option UNU or UNW or 320)
Pulse Train (Option 320 – Requires: Option UNU or UNW)
Figure 6-4 Pulse Train Menu Softkeys
Pulse > Pulse Source > More >
Pulse Train
page 134
Display area indicates Pulse Train is the current pulse
source.
This column indicates the
row of a each pulse train
cycle.
Note: When the cycles
(elements) are repeated,
the row numbers are
skipped in the displayed
count for the number of
pulse cycles repeated.
Example: For the pulse
train displayed above, in
row 2, the 3 us On Time
and 2 us Off Time pulse
cycle is repeated twice.
But, only row 2 is
displayed for that pulse
cycle (i.e. row 3 is not
displayed).
This column
displays the on
times for each
pulse cycle
(element) in the
pulse train.
This column
displays the off
times for each
pulse cycle
(element) in the
pulse train.
This column
displays the repeat
times for each
pulse cycle
(element) in the
pulse train.
These softkeys provide
ease of use in changing
the pulse cycle settings
in the pulse train.
SCPI Commands:
[:SOURce]:PULM:INTernal:TRAin:LIST:PRESet
[:SOURce]:PULM:INTernal:TRAin:OFFTime <20ns -
42sec>
[:SOURce]:PULM:INTernal:TRAin:OFFTime?
[:SOURce]:PULM:INTernal:TRAin:OFFTime:POINts?
[:SOURce]:PULM:INTernal:TRAin:ONTime <20ns -
42sec>
[:SOURce]:PULM:INTernal:TRAin:ONTime?
[:SOURce]:PULM:INTernal:TRAin:ONTime:POINts?
[:SOURce]:PULM:INTernal:TRAin:REPetition
<1-2047>
[:SOURce]:PULM:INTernal:TRAin:REPetition?
[:SOURce]:PULM:INTernal:TRAin:REPetition:POINts
?
Refer to SCPI Command Reference.
SCPI Commands (continued):
:MEMory:CATalog:PTRain?
:MEMory:DELete:PTRain
:MEMory:EXPort[:ASCii]:PTRain <"filename">
:MEMory:EXPort[:ASCii]:SEParator:COLumn
TAB|SEMicolon|{COMMa}|SPACe
:MEMory:EXPort[:ASCii]:SEParator:COLumn?
:MEMory:EXPort[:ASCii]:SEParator:DECimal
{DOT}|COMMa
:MEMory:EXPort[:ASCii]:SEParator:DECimal?
:MEMory:IMPort[:ASCii]:PTRain <"filename">
:MEMory:IMPort[:ASCii]:SEParator:DECimal
{DOT}|COMMa
:MEMory:IMPort[:ASCii]:SEParator:DECimal?
:MMEMory:LOAD:PTRain <"filename">
:MMEMory:STORe:PTRain <"filename">
For details on each key, use key help as described on page 42.
Note: the Pulse Train is
always triggered, so the
Triggering softkey is not
available in the Pulse menu.
page 135