User`s guide

Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide 123
Optimizing Performance
Using LXI (Option ALB)
Figure 5-30 Configuring LXI Trigger Input Events
For details on each key, use key help
as described on page 42.
Enables or disables
event LAN0– LAN7.
Utility > More > LXI
page 50
page 122
These are the pre–defined default input LAN event identifiers and can not be deleted.
An incoming LAN event is treated as a trigger. The trigger event identifier must be
enabled (On) and the LXI LAN (page 49) selected as the source of the trigger.
page 124
Refer to the Programming Guide and the SCPI Command Reference.