Technical data

43
Procedure for Declassifying a Faulty Instrument
10 Procedure for Declassifying a
Faulty Instrument
If the instrument is not functional, and you are unable to use the security functions, you may physically
remove the Processor board and Hard Disk or Solid State Drive (if installed).
For removal and replacement procedures, refer to the Service Guide for your instrument, as listed in Ta b le
10-1 below.
Table 10-1 Service Guide Document Locations
Signal Generator Model Link to Service Guide
N5183B MXG Microwave Analog Signal
Generator
N5182B MXG RF Vector Signal
Generator (Series B)
N5181B MXG RF Analog Signal
Generator (Series B)
N5173B EXG Microwave Analog Signal
Generator
N5172B EXG RF Vector Signal Generator
N5171B EXG RF Analog Signal Generator
http://cp.literature.agilent.com/litweb/pdf/N5180-90059.pdf
N5161A/62A/81A/82A/83A MXG
(Series A) Signal Generators
http://cp.literature.agilent.com/litweb/pdf/N5180-90006.pdf
E4428C/38C ESG Signal Generators http://cp.literature.agilent.com/litweb/pdf/E4400-90511.pdf
E8257N, E8257D/67D, E8663D PSG
Signal Generators
http://cp.literature.agilent.com/litweb/pdf/E8251-90359.pdf
E8663B Analog Signal Generator http://cp.literature.agilent.com/litweb/pdf/E8663-90009.pdf