Technical data

Products Covered by this Document

Document Purpose

This document describes instrument memory types and security features. It provides a statement regarding

the volatility of all memory types, and specifies the steps required to declassify an instrument through

memory clearing, sanitization, or removal.

For additional information, go to:

http://www.agilent.com/find/security

IMPORTANT Be sure that all information stored by the user in the instrument that needs to be saved

is properly backed up before attempting to clear any of the instrument memory. Agilent

Technologies cannot be held responsible for any lost files or data resulting from the

clearing of memory.

Be sure to read this document entirely before proceeding with any file deletion or

memory clearing.

Agilent Signal Generators PSG Signal Generator E8663D All

E8663B

All

E8267D

All

E8267C C.03.40 or higher

E8257N All

E8257D

All

E8257C C.03.40 or higher

E8247C C.03.40 or higher

ESG Signal Generator

E4438C

C.03.40 or higher

E4428C

All

a. For the N5161A/62A Signal Generators, the softkey menus and features described in this guide

are only available through the web-enabled interface or via SCPI commands. Refer to the

instrument Installation Guide, Programming Guide and SCPI Programmers Reference for more

information.

b. See “Recommended Software Upgrades” on page 11 for important firmware version information.

Product Family Name Product Name Model Number Firmware Revision