Troubleshooting guide

Using Microsoft Windows XP

Embedded Web Server: Using the X-Series Instruments Remotely

Selecting the Get Data tab

Selecting the Get Data tab allows you to capture results from the instrument’s

currently active measurement. Depending on the current measurement type, captured

results consist of either Trace Data or Measurement Results.

NOTE To capture data using the web server, the instrument application must be running.

The captured data is formatted as a Comma Separated Value (CSV) file, which may

be saved on the client computer’s hard disk, or opened with a spreadsheet application

such as Microsoft Excel, or imported into a database application such as Microsoft

Access.

A typical Get Data web page display is shown below:

If the measurement currently running does not support the selected result type, the

web page indicates this: