Troubleshooting guide

87
Using Microsoft Windows XP
Embedded Web Server: Using the X-Series Instruments Remotely
Selecting the View and Modify Configuration tab
Step Notes
1. Click Verify and Modify
Configuration.
This displays a web page, which shows the
instrument’s currently-assigned IP address
and other TCP/IP parameters.
2. Click on either of the Modify
Configuration buttons.
A password entry dialog appears.
By default, this password is set at the factory
as “agilent”. However, you may subsequently
change the password. (Press System, I/O
Config, Reset Web Password on the
instrument front panel to change the
password.)
When the correct password has been entered,
the Modify Configuration web page appears.