Troubleshooting guide

71
Using Microsoft Windows XP
Remote Desktop: Using the X-Series Instruments Remotely
Basic setup for remote desktop operation
Setting up a remote desktop connection
Step Action
1. To perform this operation
successfully, you must have
Administrator level access to
the instrument.
a. On the instrument, open the Windows
Control Panel.
b. From the instrument application, press
System, Control Panel,
or,
From the Windows Desktop, click Start,
Control Panel.
2. Select System a. From the Control Panel Category View, click
Performance and Maintenance, then click
System.
or,
From the Control Panel Classic View,
double-click System.
3. Connect to Remote Desktop a. Click the Remote tab.
NOTE A Warning Message appears,
informing you that it may be
necessary to configure your internet
connection sharing or personal
firewall to permit Remote Desktop
connections. The details of such
configuration are beyond the scope of
this document.
b. Click the Allow users to connect remotely
to this computer checkbox.