Troubleshooting guide

60
Instrument Operating System
Disk Drive Recovery Process
After exiting the Agilent Recovery System, the instrument reboots. If the original
factory instrument system has been restored, the instrument re-executes the
following process:“Turning on the EMI Receiver the First Time” on page 12.
Using the instrument recovery system
Step Notes
1. Make sure the instrument is turned
off.
2. Turn on the instrument.
• Press the down arrow key to
move the highlight to Agilent
Recovery System, then press
Enter.
After the Agilent Technologies screen is
displayed,
This screen is displayed for five seconds.
3. When the Agilent Recovery
System has booted, follow the
on-screen instructions to recover
the image of the C: drive.
• Press 2, then press Enter to
select the recovery.
4. A warning message appears.
• Press Enter to start the
recovery, which may take up to
25 minutes to complete.