Troubleshooting guide

41
Agilent X-Series Signal Analyzers
Getting Started Guide
4 Instrument Operating
System
This chapter describes the Microsoft Windows XP configuration and the settings used
with the Agilent instrument software. It includes information about changing some of
the system settings. And it describes the Windows operating system configuration and
the software installations that are present on the Hard Disk Drive when the instrument
leaves the factory.
The front panel of the EMI Receiver has been designed with the keys needed to navigate
windows for: accessing menus, traversing in dialogs, selecting items, and depressing
displayed buttons. It is possible to use the front panel for changing Windows XP
configuration items, but it is much easier to perform these tasks with a USB mouse and
external keyboard. For specifics on navigating using the front panel, see “Navigating
Windows Without a Mouse” on page 66.
The following topics can be found in this chapter:
“Agilent Software Installed” on page 42
“Customer Installation of Software” on page 42
“User Accounts” on page 43
“Agilent X-Series EMI Receiver Licensing” on page 44
“Licensing New Measurement Application Software - After Initial Purchase” on page 45
“Windows Configuration” on page 47
“Configuring Printers” on page 50
“Configuring LAN” on page 50
“Windows Security” on page 51
“System Maintenance” on page 55
“USB Connections” on page 56
“Disk Drive Partitioning and Use” on page 57
“Disk Drive Recovery Process” on page 59