Troubleshooting guide

19
Quick-Start
Anti-Virus Software and Firewalls
Anti-Virus Software and Firewalls
No anti-virus software is shipped with the EMI Receiver. It is recommended that you
install anti-virus software if your instrument is connected to the LAN. Check with
your IT department to see what they recommend.
The EMI Receiver is shipped with the Windows XP firewall enabled. Do not modify
the default network settings as this may cause problems with the operating system of
the instrument.
6. View a signal a. Press Mode, Spectrum
Analyzer.
b. Press Input/Output,
RF Calibrator, 50
MHz.
c. Press FREQ Channel,
Center Freq, 50, MHz.
d. Press SPAN X Scale,
50, MHz.
This routes the internal 50 MHz signal to the
instrument input.
The 50 MHz reference signal appears on the display.
Steps Actions Notes