Troubleshooting guide

14
Quick-Start
Turning on the EMI Receiver the First Time
4. Reboot and logon • Click OK When the instrument restarts, the following
message window appears:
This window
appears and
covers the
LaunchXSA
window.
NOTE If you do not check the “Do not show this message again” check box, this message will be
displayed each time the instrument is turned on. No application will start while this message is
displayed. Before continuing, make sure that you carefully read the Anti-Virus message and
determine what action is appropriate.
5. Disable the
Anti-Virus message
• Select the check box
and click Continue.
Messages similar to the following continue to
appears:
Several required processes continue.
The XSA application initializes
6. Verify the installation a. On the instrument, press
System, Show, System.
b. Verify that the
purchased
application(s) appear in
the list.
If you require further assistance, contact the
Agilent support team.
Online assistance:
http://www.agilent.com/find/assist
Steps Actions Notes