Troubleshooting guide

12
Quick-Start
Turning on the EMI Receiver the First Time
Turning on the EMI Receiver the First Time
Initial power-on of the instrument can be accomplished using either of the following
methods:
• “Initializing the instrument using a USB mouse” on page 12
• “Initializing the instrument using front-panel navigation” on page 16
NOTE During the initial power-on process, the instrument turns off and restarts several
times. This only happens during the initial installation process.
Initializing the instrument using a USB mouse
Steps Actions Notes
1. Connect the mouse • Connect the mouse to
one of the instrument’s
USB ports.
2. Power on the
instrument
a. Position the instrument
so you have easy access
to the power cord and
plug it in.
b. Press the power switch
(located in the lower left
corner of the
instrument’s front
panel) to turn the
instrument on.
See “Instrument Location and Rack Mounting
Requirements and “Power requirements” on
page 20 for more details.
The instrument can require more than 5 minutes
to power-on. This is affected by Windows XP
start-up requirements.
The Agilent Technologies screen appears
followed by a screen that allows you to select
the operating system.