Troubleshooting guide

107
Troubleshooting
Returning an EMI Receiver for Service
3. Surround the equipment with
three to four inches of packing
material and prevent the
equipment from moving in the
carton.
If packing foam is not available, the best
alternative is plastic bubble-pak. This
material looks like a plastic sheet filled with
1-1/4 inch air bubbles. Use the pink-colored
bubble which reduces static electricity.
Wrapping the equipment several times in this
material should both protect the equipment
and prevent it from moving in the carton.
4. Seal the shipping container
securely with strong nylon
adhesive tape.
5. Mark the shipping container
“FRAGILE, HANDLE
WITH CARE” to assure
careful handling.
6. Retain copies of all shipping
papers.
Step Notes