Technical data
Table Of Contents
- EMC Measurement Application Measurement Guide
- Table of Contents
- 1 EMC Measurements
- 2 Conducted Emissions Measurements
- 3 Radiated Emissions Measurements
- A: Line Impedance Stabilization Networks (LISN)
- B: Antenna Factors
- C: Basic Electrical Relationships
- D: Detectors Used in EMI Measurements
- Glossary of Acronyms and Definitions
13
Conducted Emissions Measurements
Making Conducted Emission Measurements
13 Update the scan a. Press Sweep/Control,
Start.
View the ambient emissions (with
the DUT off). If emissions above
the limit are noted, the power cord
between the LISN and the DUT
may be acting as an antenna.
Shorten the power cord to reduce
the response to ambient signals.
Step Action Notes