Multiple Channel Controller Multiple Channel Controller and Service Manual

85330A Multiple Channel Controller iii
What You’ll Find in This Manual…
Chapter 1 • Installation - Shows how a standard Agilent 85330A system is installed.
If you purchased a preconfigured system, Agilent has provided
documentation that contains installation information for your specific
system. Use the documentation for your special system instead of the
information in this chapter.
Chapter 2 • Performance Verification - Explains how to verify that the 85330A
system is operating properly.
Chapter 3 • Operator’s Check - This is a quick check of the system to make sure it is
operating properly.
Chapter 4 • General Information - Describes a typical system, and includes
information on:
❍ Supplied items
❍ Features
❍ 85330A connectors
❍ Accessories
❍ Specifications
❍ Environmental Characteristics
❍ Compatible instruments
Chapter 5 • Manual Operation - Describes functions that can be performed manually
using the multiple channel controller’s front panel softkeys.
Chapter 6 • Programming - Describes the 85330A programming fundamentals with
examples.
Chapter 7 • Remote Programming Command Reference - A dictionary of the
85330As programming commands.
Chapter 8 • In Case of Difficulty - How to solve common system problems.
Chapter 9 • Service - Explains how to determine if the 85330A specific control cards
are working. This chapter does not explain how to troubleshoot the VXI
mainframe, which has its own service documentaiton.