Technical data

N7280
N7280N7280
N7280-
--
-90034
9003490034
90034-
--
- Rev. A
Rev. ARev. A
Rev. A System
SystemSystem
System Installation and Verification
Installation and Verification Installation and Verification
Installation and Verification
7
77
7
1
11
1 Check for Gross Damage — Look for and record any
damage to packing materials, etc. Note any areas where
the equipment has been exposed. Document any
damage on the waybill. Advise the carrier and contact
the Agilent Customer Support Center or an Agilent
authorized service representative immediately. If
significant damage exists, document the damage
completely (take pictures if possible) prior to further
unpacking or movement.
2
22
2 Accessories — If there is an accessories box, it is
advisable to move it to the installation area before
opening.
3
33
3 Verify Items Shipped — An Agilent authorized service
representative must be present for system and crate
unloading, system movement, and system placement:
(whenever possible) Inspect all received containers and
verify the correct number of items arrived with the
shipment. (See the packing list. If the packing list is
missing, contact the customer facility receiving
personnel.)
Figure 3: System dimensions
Height
(Max.)
242 cm
(95 in.)
Width
152 cm (60 in.)
Depth
193 cm
(76 in.)