Technical data

N7280
N7280N7280
N7280-
--
-90034
9003490034
90034-
--
- Rev. A
Rev. ARev. A
Rev. A System
SystemSystem
System Installation and Verification
Installation and Verification Installation and Verification
Installation and Verification
6
66
6
The main unit will be on a pallet 188 centimeters wide by
229 centimeters long (74 x 90 inches). This pallet requires a
forklift with a rated lifting capacity of at least 4536
kilograms (10,000 pounds). The tines on the forklift must be
at least 152 centimeters (60 inches) long, each tine must be
no more than 19 centimeters (7.50 inches) wide. The main
unit, crated and on its pallet, will be approximately 244
centimeters (96 inches) high. Consider this height, plus the
lift height when moving the Medalist x6000.
To prevent rusting any x6000 Systems that are delivered to a high humid / high temp environment
should not have the vapor barrier removed until the x6000 has reached equilibrium with the inside
temperature of the factory floor.
Figure 2: Moving the system
Lift the system where shown only. Do Not use a lift or jack on the rest of the frame or system
damage could occur.
NOTE
CAUTION
Use fork lift here only.
Front of System
Opening for
tines is 19 cm
(7.5 in.) wide
Fork lift tines should
be set to 85 cm
(33.5 inch)
centers
and be 152 cm
(60 inches)
long (minimum)