Technical data

N7280

N7280N7280

N7280-

-90034

9003490034

90034-

Rev. A

Rev. ARev. A

Rev. A

System

SystemSystem

System Installation and Verification

Installation and Verification Installation and Verification

Installation and Verification

5 5

5 System Arrival, Inspection and Placement

System Arrival, Inspection and PlacementSystem Arrival, Inspection and Placement

System Arrival, Inspection and Placement

An acceptable site must be prepared prior to the installation

of the Medalist x6000 System.

This includes:

 Having a level floor capable of supporting 3220 kg

(~7100 pounds)

 371 kilograms per square meter (76 pounds per square

foot)

 805 kilograms on 152mm diameter pad, on four pads

131 x110 centimeter centers (1775 lbs. on 6 inch

diameter pads on 52 x 43 inch centers)

 Clearances for all equipment, power and air utilities

and acceptable climate control.

 Movement to the final location should be considered

before transportation. Make sure there is a travel route

with sufficient access clearances throughout the course

of movement (this includes the turning radius for the

Medalist x6000 and the forklift).

Figure 1: Medalist x6000 ready for crating

This photo shows a

x6000 as it is waiting to

be shipped from the

manufacturing facility.

This is how it will look

just prior to crating. For

shipment, it will have a

complete crate around it.