Technical data

N7280

N7280N7280

N7280-

-90034

9003490034

90034-

Rev. A

Rev. ARev. A

Rev. A

System

SystemSystem

System Installation and Verification

Installation and Verification Installation and Verification

Installation and Verification

2 2

2 Preparing for Agilent Medalist x6000 Installation

Preparing for Agilent Medalist x6000 InstallationPreparing for Agilent Medalist x6000 Installation

Preparing for Agilent Medalist x6000 Installation

You will need to refer to the following documents.

 Unpacking Instructions (N7280-90010)

 Site Preparation Manual (N7280-90009)

 Agilent Medalist x6000 Help

 Agilent Electrostatic Discharge Control Specification (A-

5951-1589-1)

 You will need a copy of the x6000 X-ray Safety Test

Procedure (N7280-90093) and the x6000 X-Ray Safety

Test Report (N7280-90076) to complete the installation.

You need to acquire these before entering the customer

site. These documents are available at

http://www.agilent.com/find/x6000. Click Technical

Support and then click Download X-Ray Safety Test

Procedure.

 The unpacking instructions (N7280-90010) will be

located on the outside of the crate. The Site Preparation

Manual has been sent to the customer before this

installation began. The Agilent Medalist x6000 help is

on-line when you get the system up and running. The

ESD document is one of general corporate nature that

you should be familiar with already. If you are not,

please review it as soon as possible.