Specifications

L4411A Getting Started Guide 25
Preparation for Use 1
Figure 1-7. Editing the L4411A LAN Settings.
Basic Measurement Connections
This section illustrates terminal connections for measurements available with
the L4411A. Connections apply to either the rear or (optional) front terminals.
NOTE
Pressing the recessed ‘LAN Reset’ button on the rear panel of the L4411A resets the LAN
interface settings to their factory-set values. Refer to “Power-On and Reset State” or to the
*RST or SYSTem:PRESet command in the 34410A/11A/L4411A Programmer’s Reference
for the list of these settings.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com