Specifications
22 L4411A Getting Started Guide
1 Preparation for Use
Figure 1-5. The L4411A SCPI Command Interface Window.
The ‘SCPI Command interface’ window enables you to send any command in
the L4411A SCPI command set to the instrument. Query commands, those
with a ‘?’ and which return data, can be executed by Write(ing) the command
and then Read(ing) the data, or by Write(ing)&Read(ing) the command using
the ‘Write & Read’ button.
Click
to open
time out
setting window
NOTE
If the SCPI Command interface window is used to send the self-test (*TST?)
command to the L4411A, the “timeout” period may have to be increased to allow
the results to be returned. This is done by entering a timeout period at the top of
the command interface window. The L4411A self-test takes approximately seven
seconds to complete.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com