Specifications

Table 4.
The Y1151A Distribution Board
Y1151A Switch options
Coil voltage (24 V) 024
Position feedback Comes Standard
Connector type (16-pin) 161
Switch types:
87104, 87106, 87406,
L7104, L7106, L7204, L7206
Cable: 16-pin to 16-pin
Each multi-port switch requires
up to eight coil drivers, so
this board can drive two such
switches. LED’s work from left
to right with each representing
a particular port of the switch.
This switch comes standard
with position feedback. You
can construct a 16-pin to 16-pin
cable to connect the switch to
the Y1151A distribution board.
Here is an example of commonly
accessible part numbers for
building a cable. All parts can
be found at popular electronics
distributors (e.g. Digi-Key or
Newark), or you can purchase
the Y1157A, Y1158A, or Y1159A
kits illustrated below:
• Ribbon Cable:
3M P/N 3365/16 (28 AWG)
• Y1151A Connector:
16-pin socket connector,
IDC termination.
3M P/N 89116-0101
• Switch Connector:
16-pin socket connector,
IDC termination.
3M P/N 89116-0101
• Y1158A Kit:
One kit supplies parts
to build two switch cables.
• Y1159A Kit:
One kit supplies parts
to build two cables to
connect to LEDs
• Wire Pin 1 to Pin 1
19