Specifications

16
Table 2. Agilent Switch to Y1155 Distribution Board
Agilent Recommended Options Description Frequency 34945EXT Distribution Board
Model Coil Indicator Connector range Number of Switches Supported
Voltage Option Option (style)
Y1150A Y1151A Y1152A Y1153A Y1154A Y1155A
Option (Table 3) (Table 4) (Table 5) (Table 6) (Table 7)
8762A 024 N/A -- (solder terminal) Terminated latching DC to 4 GHz 8
3-port (SPDT)
8762B 024 N/A -- (solder terminal) DC to 18 GHz 8
8762C 024 N/A -- (solder terminal) DC to 26.5 GHz 8
8762F 024 N/A -- (solder terminal) 75 ohms terminated (SPDT) DC to 4 GHz 8
8763A 024 N/A -- (solder terminal) Terminated latching DC to 4 GHz 8
4-port (transfer)
8763B 024 N/A -- (solder terminal) DC to 18 GHz 8
8763C 024 N/A -- (solder terminal) DC to 26.5 GHz 8
8764A 024 N/A -- (solder terminal) Terminated latching 5-port DC to 4 GHz 8
8764B 024 N/A -- (solder terminal) DC to 18 GHz 8
8764C 024 N/A -- (solder terminal) DC to 26.5 GHz 8
8765A 324 N/A 324 (solder terminal) Coaxial (SPDT), SMA DC to 4 GHz 8
8765B 324 N/A 324 (solder terminal) Coaxial (SPDT), SMA DC to 20 Ghz 8
8765C 324 N/A 324 (solder terminal) Coaxial (SPDT), 3.5 mm DC to 26.5Ghz 8
8765D 324 N/A 324 (solder terminal) Coaxial (SPDT), 2.4 mm DC to 40 Ghz 8
8765F 324 N/A 324 (solder terminal) Coaxial switch, DC to 4 GHz 8
(SPDT) 75 ohm, SMB
8766K 024 N/A 060 (Viking to wire) Coaxial switch, (SP3T) DC-26.5 GHz 2
8767M 024 N/A see notes Coaxial switch, (SP4T) DC-50 GHz 2
8767K 024 N/A 060 (Viking to wire) Coaxial switch, (SP4T) DC-26.5 GHz 2
8768K 024 N/A 060 (Viking to wire) Coaxial switch, (SP5T) DC-26.5 GHz 1
8768M 024 N/A see notes Coaxial switch, (SP5T) DC-50 GHz 1
8769K 024 N/A 060 (Viking to wire) Coaxial switch, (SP6T) DC-26.5 GHz 1
8769M 024 N/A see notes Coaxial switch, (SP6T) DC-50 GHz 1
N9397A -- N/A -- (solder terminal) 8 GHz Solid State Switch 300 kHz-8 GHz 8
N9397C -- N/A -- (solder terminal) 18 GHz Solid State Switch 300 kHz-18 GHz 8
U9397A -- N/A -- (solder terminal) 8 GHz Solid State Switch 300 kHz-8 GHz 8
U9397C -- N/A -- (solder terminal) 18 GHz Solid State Switch 300 kHz-18 GHz 8
Notes: The number listed in the column is the maxium number of switches which may be connected within each switch model type
as limited by the total number of available drivers.
A total number of 16 drivers are available, and it is possible to mix switch models on one Y1155A until all 16 drivers are used.
The number of drivers required by each switch varies. See the switch datasheet for details
For 876xM relays, recommended cable accessory P/N 11764-60001 (10 DIP to wire) needs to be purchased separately.
“--” means the preferred switch configuration for voltage, indicator and/or connector comes standard with the base part number