User`s guide

Protocol Analyzer
Working with Captured Packets
5967–9446 393
To save captured packets in a trace file
1 Choose File➤ Load Data… from the base window.
2 Specify the trace or capture buffer file to load.
.
All Packets
1 To save all packets, choose File➤Save Data… from the
base window.
2 Specify the file in which to save the data.
1 Choose File➤ Load Data➤ File… from the packet
decodes window.
2 Specify the trace or capture buffer file to load.
All Packets
1 To save all packets, choose File➤Save Data➤Save All…
from the packet decodes window.
2 Specify the file in which to save the data.
Marked
1 To save only marked packets, choose File➤Save Data➤
Save Marked… from the packet decodes window.
2 Specify the file in which to save the data.
Unmarked
1 To save only unmarked packets, choose
File
➤Save Data➤ Save Unmarked… from the packet
decodes window.
2 Specify the file in which to save the data.
You can save data while packet capture is in progress or after capture is
stopped.
See Also “To load a trace file” on page 394.