User`s guide

Protocol Analyzer
Working with Captured Packets
390 5967–9446
Figure 82 on page 391 shows the affects of some of the Summary View
properties.
The Summary pane characteristics that you set can be saved in a config-
uration file, which can be loaded at any time. In addition, you can change
the defaults used for the Summary pane. Refer to page 399 for details.
See Also “Working with Configuration Files” on page 399.
MAC Format Indicates the format for MAC addresses:
Hex shows the address as 12 hexadecimal digits.
Manufacturer translates the first three bytes of the address to the
manufacturer name. If the manufacturer is unknown to NetMetrix,
then the address is displayed in Hex format.
Host translates addresses to names, as defined in the sysnodelist
file. If the name is not found, then the address is displayed in
Manufacturer format.
None suppresses the display of MAC addresses.