User`s guide

Protocol Analyzer
Working with Captured Packets
386 5967–9446
To mark packets
● Double-click on an unmarked packet in the Summary
pane.
● Choose Marks➤Mark Current or use Ctrl+M to mark
the current packet.
● Choose Marks➤Mark by Number… or use
Ctrl+Shift+M to mark a specific packet number.
Marking packets lets you differentiate them from the rest. You can then
perform operations on only marked packets or only unmarked packets,
including:
● jump to the next or previous marked packet
● save all marked packets in a trace file
● save all unmarked packets in a trace file
Marked packets appear with an M character to the left of the packet
number in the Summary pane. (Refer to item ➀ in figure 80 on page 382.)
See Also “To save captured packets in a trace file” on page 393.
To unmark packets
● Double-click on the marked packet in the Summary
pane.
● Choose Marks➤Unmark Current or use Ctrl+U to
mark the current packet.
● Choose Marks➤Unmark by Number… or use
Ctrl+Shift+U to mark a specific packet number.
● To clear all marks, choose Marks➤Unmark All, then
confirm the action.