User`s guide

Protocol Analyzer
Using Packet Capture Instances
352 5967–9446
To remove an instance
1 Select Instance➤Remove… from the base window.
2 Choose the instance you want to remove and click OK.
3 Confirm that you want to remove the instance.
You can also remove an instance by giving the protanal -remove
command, as discussed on page 405.
See Also “To configure the capture buffer” on page 356.
“To save captured packets in a trace file” on page 393.
“Using the protanal Command” on page 405.
Caution
When you remove an instance, any captured packets for that instance
are discarded. If you want to keep the captured packets, ensure that you
save them before you remove the instance. Refer to page 393 for
instructions.